1–1.5 m
Standing height
From Kabuto at a metre to the tallest columns at a metre and a half - each design's measurements are on its page.
Floor Lamps
Standing lamps, a metre to a metre and a half tall.
Printed columns and shades on an aluminium spine, a stem or three oak legs. The columns are lit along their length by a 24 V LED strip; Kabuto and Tripod hang an E27 bulb.
See the range
Coming soon, from RM1,590.00 complete
24 V
Lit along the whole column
A low-voltage LED strip, 2700 K, runs up inside the column, behind the glowing wall. It plugs into a socket through the adaptor supplied, and an in-line dimmer sets the level.
E27
Or one bulb, on the standard cord set
Kabuto and Tripod hold a single A60 LED bulb on the same E27 cord set as the table lamps.
0.84 mm
Two walls thick
The glowing parts are two continuous walls of translucent PLA, no infill - thin enough that the material itself glows rather than merely holding a shape.
Light from the floor up.
Printed to order in Malaysia, one at a time, in a wall two beads thick.
What is in the box.
Everything needed to have it working the day it arrives. No wiring, and no separate trip for a bulb.
- Lamp
- Printed on an aluminium spine or stem, or in three oak legs. One size.
- Material
- The glowing parts in translucent PLA; the foot, collars and crowns in matte PLA. Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
- Light
- The columns: a 24 V LED strip, 2700 K, inside the column, with a plug-in adaptor and an in-line dimmer. Kabuto and Tripod: the standard E27 cord set and a 2700 K A60 LED bulb.
- Colours
- Every part in its own colour, chosen on the page. Light colours pass more light; dark ones less.
- Made
- To order, in Malaysia. Ships by Fri 23 Oct.
The range
Each one printed when it is ordered, in the colours you choose.
Koma
Koma, the spinning top: four glowing lenses stood on edge, each with one dimple, each turned a quarter further round, in a column 1.3 m tall.
From RM1,590.00
Kusari
Kusari, the chain: four bevelled links, every other one turned a quarter, threaded on a glowing tube 1.3 m tall.
From RM1,590.00
Kabuto
Kabuto, the helmet: a 36 cm sphere open on one side, on a slim stem a metre tall, the bulb glowing inside.
From RM1,590.00
Totem
A column of glowing spindles, double cones and beads, 1.5 m tall.
From RM1,590.00
Spindle
A slender column of long spindles and beads with one double cone at mid-height, 1.5 m tall.
From RM1,590.00
Finial
A column of tall spindles under a large double cone, 1.5 m tall.
From RM1,590.00
Tripod
A tall capsule shade hung between three splayed oak legs, about 1.5 m tall.
From RM1,590.00
Column
A slim glowing column of eight pleats twisting one and a half turns, 1.2 m tall.
From RM1,590.00
Helix
A glowing ribbon twisting up a column 1.4 m tall.
From RM1,590.00
Slot
A glowing tube standing in the slot between two curved, waisted panels, 1.3 m tall.
From RM1,590.00
If you are not sure
The same answers the product page gives, so nothing changes between here and checkout.
What it is made of
Translucent where the lamp glows, matte for the trim, printed one fine layer at a time. Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
Each spool varies very slightly in tint, so two lamps bought months apart may not be an exact colour match. For lamps that must match, order them together.
Which bulb, and why it matters
LED only, 6 W or less, and this one is not a preference.
Never an incandescent or halogen bulb: inside a closed shade it runs far hotter than a printed lamp is made for. A 6 W LED runs far cooler, which is why only LEDs are allowed. Every lamp ships with its LED.
2700 K is the warm white these are rendered and finished against. Keep the lamp out of hot direct sun as well.