Hotaru
A glowing ball with a fine knit across it, in a low cup, closed by a flat top - the whole lamp in one colour, in two tones.
From RM379.00
Mini Lamps
One ball of light. Eight colours.
Hotaru, 13 cm across.
The whole lamp in one colour.
Two tones of it.
The same 0.84 mm wall.
Bulb included.
Get the highlights.
Day and night.
By day it is a printed object in the colours you chose. Switch it on, and the shade becomes the light.
Made to come apart.
Taken apart · Hotaru
Three parts and a bulb.
The orb and the flat top lift off their magnets. The base holds an E27 lampholder and a G45 LED bulb, and the cord leaves it at the back.
16 magnets G45 LED bulb included
Coming soon
Smart light.
Choose the Philips Smart LED bulb and the lamp answers to your phone: warm or cool, bright or a glow, on a schedule or by voice. Over your home Wi-Fi with the WiZ app - no hub.
- 2700–6500 K warm to cool white
- Dimmable from the app
- Schedules on before you are home
- Voice with your assistant
8
colours
13 cm
across
0.84 mm
two walls, thin enough to glow
G45
LED bulb included
2700–6500 K
with the Philips smart bulb, coming soon
Hotaru
A glowing ball with a fine knit across it, in a low cup, closed by a flat top - the whole lamp in one colour, in two tones.
From RM379.00
Classic. 37 designs, made small.
Kasa
A pleated dome on a tapered base, its 32 pleats turned like a closing umbrella. It throws its light down onto the table.
From RM379.00
Kumo
Four rounded tiers, each smaller than the one below, under fine ribs turned through 25 degrees.
From RM379.00
Jūbako
Three straight-sided drums stacked like a lacquered food box, under fine vertical ribs.
From RM379.00
Uroko
Three rows of seven rounded lobes, laid over each other like scales.
From RM379.00
Chōchin
A paper-lantern shape: six lobes turned through 40 degrees, between two coloured rings.
From RM379.00
Dango
Four equal rounds stacked on a long neck, like dumplings on a skewer.
From RM379.00
Hyōtan
A gourd: a full lower bulb, a narrow waist and a small top, ribs turned through 30 degrees.
From RM379.00
Awa
A rounded shade covered in nine rows of small raised bubbles.
From RM379.00
Obi
A capsule with one raised band spiralling a turn and a quarter round it, like a sash.
From RM379.00
Nami
A round shade with two raised waves crossing four times.
From RM379.00
Ito
A round shade with one raised thread winding one and a half times round it.
From RM379.00
Hasu
A low cone of lotus petals in two rows, each petal finely pleated.
From RM379.00
Tsuki
A ribbed column that glows, with three crescent blades standing round it.
From RM379.00
Bōshi
A wide flat brim on a flared, glowing column, with forty-eight gills under the brim that catch the light from below.
From RM379.00
Rings
A wide body in three soft rings, its wall finely knitted.
From RM379.00
Ripple
A bell gathered into wandering vertical folds.
From RM379.00
Fins
A square column of deep fins under a low roof.
From RM379.00
Vase
An onion-shaped vase - foot, full belly, waist and mouth - its wall finely knitted.
From RM379.00
Bubbles
Three equal bubbles stacked on a neck.
From RM379.00
Bulb
Three bubbles stacked small, big, small.
From RM379.00
Capsule
A capsule with a raised ring tilted round it.
From RM379.00
Cloud
A lantern covered in raised bubbles under a ribbed lid.
From RM379.00
Moon
A ribbed column that glows between two half-moon blades.
From RM379.00
Mushroom
A pleated dome under a coloured cap, throwing its light down.
From RM379.00
Pagoda
Three equal pleated tiers, each a double cone, stacked like a pagoda.
From RM379.00
Petal
A wide cone of ten pleated petals under a small cap.
From RM379.00
Pills
Two staggered rows of eight pill-shaped lobes.
From RM379.00
Saucer
A wide flat brim on a knitted, flared column that glows beneath it.
From RM379.00
Twin
A large bubble under a squat one.
From RM379.00
Wave
A sphere circled by a raised ring with three crests.
From RM379.00
Worms
Three raised tubes wandering over a sphere.
From RM379.00
Fluted
A grooved drum pinched above its foot band, on a low plinth.
From RM379.00
Taper
A tall hourglass with a faceted upper flare, on a low plinth.
From RM379.00
Flare
A square pyramid carrying a wide hexagonal bowl, on a low plinth.
From RM379.00
Beaker
A slim round cone under a hexagonal top, on a low plinth.
From RM379.00
Beacon
A hexagonal gem over a square pyramid, on a low plinth.
From RM379.00
Lobe
A lantern of five straight, finely ribbed lobes between a top ring and a collar.
From RM379.00
Compare.
| Hotaru | Classic, small | |
|---|---|---|
| Designs | One shape | 38 designs |
| Size | Ø13 × H12.8 cm | Ø10.4–26.5 × H20.2–35.1 cm |
| Price | RM379.00 | RM379.00 |
| Bulb | LED G45 E27, 2700 K, included | LED A60 / G45 E27, 2700 K, included |
| Colours | Six, the whole lamp in one | Part by part: three glowing, three solid |
| Assembly | Three parts, 16 magnets | Printed in parts, held by magnets |
| Cord | Standard E27 cord set: 2 m twisted fabric, switch, plug for your country | Standard E27 cord set: 2 m twisted fabric, switch, plug for your country |
Accessories.
Coming soon
Philips Smart LED bulb
The Philips Smart LED (WiZ) P45 E27 in place of the standard bulb: warm 2700 K to cool 6500 K and dimmable from the WiZ app, over your home Wi-Fi. Offered on lamps that take a G45 bulb.
Included
Standard E27 cord set
E27 lampholder, 2 m twisted fabric cord, in-line switch and the plug for your country - the same on every lamp that plugs in. A spare, or one for another room: ask us on WhatsApp.
Coming soon
Cord set, 3 m
The same cord set with 3 m of twisted fabric cord, for a socket further away: E27 lampholder, in-line switch and the plug for your country.
Included
LED bulb, 2700 K
A G45 golf-ball bulb in Hotaru, the small lamps and the wall lamps; an A60 in the medium and large table lamps. LED only - never incandescent or halogen.
Sold singly
A part in another colour
Every part lifts off its magnets, so a new shade, top or base changes the lamp without replacing it. Each one is sold on its own, in any colour.
Materials Guide.
Every lamp is printed to order, one fine layer at a time, entirely in PLA.
- Translucent PLA
- The parts that glow - shades, orbs, diffusers. Printed as two walls, 0.84 mm together, so the light comes through the material itself. Colour changes the light as much as the look: light colours fill a room, darker ones glow more quietly.
- Matte PLA
- Bases, backplates, rings, bands, caps, tops, collars and feet. Opaque, printed thicker, in the colours that frame the glow.
- PLA
- Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
- Layer lines
- Faint lines one layer apart run round every printed part. They are how the lamp was made, and lit, they are part of the picture.
- Heat
- Use LED bulbs only - every lamp comes with one - never incandescent or halogen, which run far hotter than a printed lamp is made for. Keep the lamp out of hot direct sun.
- Care
- Indoor use. Dust with a dry cloth or a soft brush; keep solvents and harsh cleaners away from the printed parts.
- Colour
- Tint can vary slightly between spools. For lamps that must match, order them together.
Mini Lamps
The small size, for the corner that needed something.
Nearly every table lamp also comes small - for a bedside table, a shelf, the end of a sideboard. Close enough to look at properly, which is where the print earns its keep.
See the range
Coming soon, from RM379.00 complete
Small
Reads at arm's length
At this size a lamp is not lighting a room, it is an object you sit next to - close enough that the texture of the print is part of it.
G45
A golf-ball bulb, in the box
The small lamps sit lower over the lampholder, so they take a G45 golf-ball LED rather than an A60. It ships with the lamp.
Magnets
Every part lifts off
The same magnetic parts as the larger sizes, so a colour can be changed later without replacing the lamp.
Pairs
Two is the usual order
Bedside tables come in twos, and two of these lit together is a different room from one. They are printed to order, so a pair is genuinely a pair rather than whatever the shelf had.
Small, not a smaller version.
Printed to order in Malaysia, one at a time, in a wall two beads thick.
What is in the box.
Everything needed to have it working the day it arrives. No wiring, and no separate trip for a bulb.
- Lamp
- Hotaru, or the small size of a table lamp, printed in parts and held by magnets.
- Material
- The orb or shade in translucent PLA; the base, top and trim in matte PLA. Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
- Fittings
- The standard E27 cord set: E27 lampholder, 2 m twisted fabric cord, in-line switch and plug.
- Bulb
- 2700 K G45 golf-ball LED.
- Colours
- Every part in its own colour, chosen on the page. Light colours pass more light; dark ones less.
- Made
- To order, in Malaysia. Ships by Fri 23 Oct.
If you are not sure
The same answers the product page gives, so nothing changes between here and checkout.
What it is made of
Translucent where the lamp glows, matte for the trim, printed one fine layer at a time. Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
Each spool varies very slightly in tint, so two lamps bought months apart may not be an exact colour match. For lamps that must match, order them together.
Which bulb, and why it matters
LED only, 6 W or less, and this one is not a preference.
Never an incandescent or halogen bulb: inside a closed shade it runs far hotter than a printed lamp is made for. A 6 W LED runs far cooler, which is why only LEDs are allowed. Every lamp ships with its LED.
2700 K is the warm white these are rendered and finished against. Keep the lamp out of hot direct sun as well.