Kasa
A pleated dome on a tapered base, its 32 pleats turned like a closing umbrella. It throws its light down onto the table.
From RM379.00
Table Lamps
Light you can see the layers in.
Printed after you order.
Two walls, 0.84 mm.
Parts held by magnets.
Coloured part by part.
Most in three heights.
Get the highlights.
Day and night.
By day it is a printed object in the colours you chose. Switch it on, and the shade becomes the light.
Made to come apart.
Taken apart · Chōchin
Five parts. No glue.
Core, base, collar, shade and top ring are printed one at a time and held together by magnets, so every part takes its own colour and lifts off by hand.
24 magnets 5 printed parts
Coming soon
Smart light.
Choose the Philips Smart LED bulb and the lamp answers to your phone: warm or cool, bright or a glow, on a schedule or by voice. Over your home Wi-Fi with the WiZ app - no hub.
- 2700–6500 K warm to cool white
- Dimmable from the app
- Schedules on before you are home
- Voice with your assistant
0.84 mm
two walls, thin enough to glow
24
magnets, no glue
3
heights for most designs
2700 K
LED bulb included
2700–6500 K
with the Philips smart bulb, coming soon
Kasa
A pleated dome on a tapered base, its 32 pleats turned like a closing umbrella. It throws its light down onto the table.
From RM379.00
Kumo
Four rounded tiers, each smaller than the one below, under fine ribs turned through 25 degrees.
From RM379.00
Jūbako
Three straight-sided drums stacked like a lacquered food box, under fine vertical ribs.
From RM379.00
Uroko
Three rows of seven rounded lobes, laid over each other like scales.
From RM379.00
Chōchin
A paper-lantern shape: six lobes turned through 40 degrees, between two coloured rings.
From RM379.00
Dango
Four equal rounds stacked on a long neck, like dumplings on a skewer.
From RM379.00
Hyōtan
A gourd: a full lower bulb, a narrow waist and a small top, ribs turned through 30 degrees.
From RM379.00
Awa
A rounded shade covered in nine rows of small raised bubbles.
From RM379.00
Obi
A capsule with one raised band spiralling a turn and a quarter round it, like a sash.
From RM379.00
Nami
A round shade with two raised waves crossing four times.
From RM379.00
Ito
A round shade with one raised thread winding one and a half times round it.
From RM379.00
Hasu
A low cone of lotus petals in two rows, each petal finely pleated.
From RM379.00
Tsuki
A ribbed column that glows, with three crescent blades standing round it.
From RM379.00
Bōshi
A wide flat brim on a flared, glowing column, with forty-eight gills under the brim that catch the light from below.
From RM379.00
Rings
A wide body in three soft rings, its wall finely knitted.
From RM379.00
Ripple
A bell gathered into wandering vertical folds.
From RM379.00
Fins
A square column of deep fins under a low roof.
From RM379.00
Vase
An onion-shaped vase - foot, full belly, waist and mouth - its wall finely knitted.
From RM379.00
Bubbles
Three equal bubbles stacked on a neck.
From RM379.00
Bulb
Three bubbles stacked small, big, small.
From RM379.00
Capsule
A capsule with a raised ring tilted round it.
From RM379.00
Cloud
A lantern covered in raised bubbles under a ribbed lid.
From RM379.00
Moon
A ribbed column that glows between two half-moon blades.
From RM379.00
Mushroom
A pleated dome under a coloured cap, throwing its light down.
From RM379.00
Pagoda
Three equal pleated tiers, each a double cone, stacked like a pagoda.
From RM379.00
Petal
A wide cone of ten pleated petals under a small cap.
From RM379.00
Pills
Two staggered rows of eight pill-shaped lobes.
From RM379.00
Saucer
A wide flat brim on a knitted, flared column that glows beneath it.
From RM379.00
Twin
A large bubble under a squat one.
From RM379.00
Wave
A sphere circled by a raised ring with three crests.
From RM379.00
Worms
Three raised tubes wandering over a sphere.
From RM379.00
Fluted
A grooved drum pinched above its foot band, on a low plinth.
From RM379.00
Taper
A tall hourglass with a faceted upper flare, on a low plinth.
From RM379.00
Flare
A square pyramid carrying a wide hexagonal bowl, on a low plinth.
From RM379.00
Beaker
A slim round cone under a hexagonal top, on a low plinth.
From RM379.00
Beacon
A hexagonal gem over a square pyramid, on a low plinth.
From RM379.00
Lobe
A lantern of five straight, finely ribbed lobes between a top ring and a collar.
From RM379.00
Tripod Table
A ribbed lantern shade held in a stand of three oak legs, one of them rising into a loop handle.
From RM459.00
Compare.
| Small | Medium | Large | |
|---|---|---|---|
| Designs | 38 designs | 38 designs | 38 designs |
| Size | Ø10.4–26.5 × H20.2–35.1 cm | Ø12.5–30 × H24.5–41.4 cm | Ø14.9–33.8 × H26.3–48.8 cm |
| Price | RM379.00 | RM459.00 | RM599.00 |
| Bulb | LED A60 / G45 E27, 2700 K, included | LED A60 / G45 E27, 2700 K, included | LED A60 / G45 E27, 2700 K, included |
| Colours | Part by part: three glowing, three solid | Part by part: three glowing, three solid | Part by part: three glowing, three solid |
| Assembly | Printed in parts, held by magnets | Printed in parts, held by magnets | Printed in parts, held by magnets |
| Cord | Standard E27 cord set: 2 m twisted fabric, switch, plug for your country | Standard E27 cord set: 2 m twisted fabric, switch, plug for your country | Standard E27 cord set: 2 m twisted fabric, switch, plug for your country |
Accessories.
Coming soon
Philips Smart LED bulb
The Philips Smart LED (WiZ) P45 E27 in place of the standard bulb: warm 2700 K to cool 6500 K and dimmable from the WiZ app, over your home Wi-Fi. Offered on lamps that take a G45 bulb.
Included
Standard E27 cord set
E27 lampholder, 2 m twisted fabric cord, in-line switch and the plug for your country - the same on every lamp that plugs in. A spare, or one for another room: ask us on WhatsApp.
Coming soon
Cord set, 3 m
The same cord set with 3 m of twisted fabric cord, for a socket further away: E27 lampholder, in-line switch and the plug for your country.
Included
LED bulb, 2700 K
A G45 golf-ball bulb in Hotaru, the small lamps and the wall lamps; an A60 in the medium and large table lamps. LED only - never incandescent or halogen.
Sold singly
A part in another colour
Every part lifts off its magnets, so a new shade, top or base changes the lamp without replacing it. Each one is sold on its own, in any colour.
Materials Guide.
Every lamp is printed to order, one fine layer at a time, entirely in PLA.
- Translucent PLA
- The parts that glow - shades, orbs, diffusers. Printed as two walls, 0.84 mm together, so the light comes through the material itself. Colour changes the light as much as the look: light colours fill a room, darker ones glow more quietly.
- Matte PLA
- Bases, backplates, rings, bands, caps, tops, collars and feet. Opaque, printed thicker, in the colours that frame the glow.
- PLA
- Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
- Layer lines
- Faint lines one layer apart run round every printed part. They are how the lamp was made, and lit, they are part of the picture.
- Heat
- Use LED bulbs only - every lamp comes with one - never incandescent or halogen, which run far hotter than a printed lamp is made for. Keep the lamp out of hot direct sun.
- Care
- Indoor use. Dust with a dry cloth or a soft brush; keep solvents and harsh cleaners away from the printed parts.
- Colour
- Tint can vary slightly between spools. For lamps that must match, order them together.
Table Lamps
Printed whole, base and all.
Every design printed in parts - base, band, shade and ring - and held together by magnets, each part in the colour you choose. Unpack it, plug it in.
See the range
Coming soon, from RM379.00 complete
3 sizes
Small, medium and large
Most designs come in three heights, each complete; Tripod Table comes in one. Small lamps and every lamp on a plinth take a G45 golf-ball bulb; the rest an A60.
Magnets
Every part lifts off
Base, band, shade and ring are held by magnets, not glue. Change one part's colour later and the rest of the lamp stays.
LED only
The right bulb, in the box
2700 K, warm. An incandescent or halogen bulb inside a closed shade runs far hotter than a printed lamp is made for, so it is LED only, always. Shipping the correct one removes the decision.
0.84 mm
Two walls thick
The shade is two continuous walls of translucent PLA, no infill - thin enough that the material itself glows rather than merely holding a shape.
The one that stays put.
Printed to order in Malaysia, one at a time, in a wall two beads thick.
What is in the box.
Everything needed to have it working the day it arrives. No wiring, and no separate trip for a bulb.
- Lamp
- Shade, base and the rings, band or cap that go with them; Tripod Table stands on three oak legs.
- Material
- The shade in translucent PLA; the base, rings, band and cap in matte PLA. Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
- Sizes
- Most designs in small, medium and large; Tripod Table in one size. Each design's measurements are on its page.
- Fittings
- The standard E27 cord set: E27 lampholder, 2 m twisted fabric cord, in-line switch and plug.
- Bulb
- 2700 K LED: a G45 golf ball or an A60, by design and size - each lamp's page says which.
- Colours
- Every part in its own colour, chosen on the page. Light colours pass more light; dark ones less.
- Made
- To order, in Malaysia. Ships by Fri 23 Oct.
If you are not sure
The same answers the product page gives, so nothing changes between here and checkout.
What it is made of
Translucent where the lamp glows, matte for the trim, printed one fine layer at a time. Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
Each spool varies very slightly in tint, so two lamps bought months apart may not be an exact colour match. For lamps that must match, order them together.
Which bulb, and why it matters
LED only, 6 W or less, and this one is not a preference.
Never an incandescent or halogen bulb: inside a closed shade it runs far hotter than a printed lamp is made for. A 6 W LED runs far cooler, which is why only LEDs are allowed. Every lamp ships with its LED.
2700 K is the warm white these are rendered and finished against. Keep the lamp out of hot direct sun as well.