Coming soon
Shigure
From RM329.00
No reviews yet
A waisted cone of fine ribs that sway like a passing shower, hardest at the hem.
Coming soon
Shigure is being test-printed. It goes on sale when the first one is lit in our own workshop - until then, choose a size and colours below to see it.
Size. The same lamp, three heights.
- Small 152 × 172 mm RM329.00
- Medium 190 × 215 mm RM399.00
- Large 228 × 246 mm RM499.00
Colourway. Pick the colour you like best.
Colours. Every part, your choice.
In the box.
Printed to order as a single piece of translucent PLA, its top ring clamped by the lampholder. Comes complete: the same E27 lampholder as every lamp on the cord length you choose - 1, 2 or 3 m of twisted fabric cord - ending in a ceiling rose, and a 2700 K LED bulb. The ceiling rose replaces an existing ceiling fitting, so it is connected by an electrician, who sets the drop.
Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
The small size takes a G45 golf-ball bulb, included; medium and large take an A60.
What’s in the box
Specifications
Download spec sheet (PDF)| OVERVIEW | Designer | Year | Hakumei | 2026 |
|---|---|---|
| Dimensions | Small Ø15.2 × H17.2 cm Medium Ø19 × H21.5 cm Large Ø22.8 × H24.6 cm | |
| Weight | Small approx. 0.32 kg complete (73 g printed) Medium approx. 0.38 kg complete (119 g printed) Large approx. 0.43 kg complete (172 g printed) | |
| Material | Shade: translucent PLA. About the materials | |
| Origin | Designed and printed in Malaysia | |
| Assembly | One printed piece | |
| Patterns | Original, Bubble, Wave and Knit | |
| Colours | Shade: any of 5 translucent colours | |
| ILLUMINATION | Light source | Small LED, E27 G45 golf-ball bulb, included Medium LED, E27 A60 bulb, included Large LED, E27 A60 bulb, included |
| Light output | Small approx. 500 lm Medium approx. 600 lm Large approx. 600 lm | |
| Colour temperature | 2700 K | |
| CRI | approx. 80+ | |
| Life hours | approx. 15,000 | |
| POWER | Input | 220–240 V AC; 110–120 V for Canada and Taiwan |
| Max. usage | approx. 6 W | |
| Connection | Wired to a ceiling point by a qualified electrician | |
| DIMMING | Not dimmable as supplied. | |
| SUSPENSION | Cord | 1, 2 or 3 m twisted fabric (your choice), adjustable drop |
| Ceiling rose | Replaces the existing fitting | |
| Lampholder | E27 | |
| CARE | Indoor use only. Dust with a dry cloth or a soft brush; keep acetone, solvents and harsh cleaners away from the printed parts. LED bulbs only, never incandescent or halogen: they run far hotter than a printed lamp is made for. Keep out of hot direct sun. | |
| MATERIALITY | Printed to order, one fine layer at a time, so faint layer lines are part of the surface. Tint can vary slightly between spools: for lamps that must match, order them together. | |
Figures marked approx. are typical of the bulb and fittings supplied and are confirmed against the first lamps made.