Coming soon
Ōgi
From RM389.00
No reviews yet
A wall light shaped like an open folding fan, its pleats running out from the pivot.
Coming soon
Ōgi is being test-printed. It goes on sale when the first one is lit in our own workshop - until then, choose a size and colours below to see it.
Size. Made in one size.
- One size 248 × 199 mm RM389.00
Colourway. Ready-made colours for every part.
Colours. Every part, your choice.
In the box.
Printed to order: a translucent PLA diffuser that holds onto its backplate with magnets and lifts off to change the bulb; the backplate, which holds the lampholder, is matte PLA. Comes complete: a plug-in bracket with the standard E27 cord set (E27 lampholder, 2 m twisted fabric cord, in-line switch and the plug for the country it is delivered to), and a 2700 K G45 LED bulb. The backplate drops onto a printed wall cleat, which goes up first with the two screws and wall plugs in the box, or with 3M VHB tape on a smooth, sound wall; a paper template shows where. No wiring.
Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
What’s in the box
Specifications
Download spec sheet (PDF)| OVERVIEW | Designer | Year | Hakumei | 2026 |
|---|---|---|
| Dimensions | W24.8 × H19.9 × D8.5 cm | |
| Weight | approx. 0.48 kg complete (258 g printed) | |
| Material | Diffuser: translucent PLA. Backplate and wall cleat: matte PLA. About the materials | |
| Origin | Designed and printed in Malaysia | |
| Assembly | 8 magnets, no glue or screws: every part lifts off | |
| Patterns | Original, Bubble, Wave and Knit | |
| Colours | Diffuser: any of 5 translucent colours. Other parts: any of 5 matte colours, each part its own | |
| ILLUMINATION | Light source | LED, E27 G45 golf-ball bulb, included |
| Light output | approx. 500 lm | |
| Colour temperature | 2700 K | |
| CRI | approx. 80+ | |
| Life hours | approx. 15,000 | |
| POWER | Input | 220–240 V AC; 110–120 V for Canada and Taiwan |
| Max. usage | approx. 6 W | |
| Plug | Type G (MY, SG, HK), Type I (AU, NZ, CN), Type C (TH), Type A (TW, CA) | |
| DIMMING | Not dimmable as supplied. | |
| MOUNTING | Cord | 2 m twisted fabric, in-line switch, plug for your country (standard E27 cord set) |
| Fixing | Drops onto a printed wall cleat; no wiring | |
| Wall fixings | Screws and plugs, or 3M VHB tape; template in the box | |
| Offset from wall | 8.5 cm | |
| Lampholder | E27 | |
| CARE | Indoor use only. Dust with a dry cloth or a soft brush; keep acetone, solvents and harsh cleaners away from the printed parts. LED bulbs only, never incandescent or halogen: they run far hotter than a printed lamp is made for. Keep out of hot direct sun. | |
| MATERIALITY | Printed to order, one fine layer at a time, so faint layer lines are part of the surface. Tint can vary slightly between spools: for lamps that must match, order them together. | |
Figures marked approx. are typical of the bulb and fittings supplied and are confirmed against the first lamps made.