Coming soon
Lobe
From RM379.00
No reviews yet
A lantern of five straight, finely ribbed lobes between a top ring and a collar.
Coming soon
Lobe is being test-printed. It goes on sale when the first one is lit in our own workshop - until then, choose a size and colours below to see it.
Size. The same lamp, three heights.
- Small 142 × 270 mm RM379.00
- Medium 174 × 330 mm RM459.00
- Large 211 × 400 mm RM599.00
Colourway. Ready-made colours for every part.
Colours. Every part, your choice.
In the box.
Printed to order and held together by magnets, so any part lifts off and can be swapped for another colour: the shade in translucent PLA, the base and trim in matte PLA. Comes complete: the standard E27 cord set (E27 lampholder, 2 m twisted fabric cord, in-line switch and the plug for the country it is delivered to) and a 2700 K LED bulb.
Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
What’s in the box
Specifications
Download spec sheet (PDF)| OVERVIEW | Designer | Year | Hakumei | 2026 |
|---|---|---|
| Dimensions | Small Ø14.2 × H27 cm Medium Ø17.4 × H33 cm Large Ø21.1 × H40 cm | |
| Weight | Small approx. 0.37 kg complete (165 g printed) Medium approx. 0.46 kg complete (255 g printed) Large approx. 0.64 kg complete (431 g printed) | |
| Material | Shade: translucent PLA. Top ring, collar and base: matte PLA. About the materials | |
| Origin | Designed and printed in Malaysia | |
| Assembly | Small 24 magnets, no glue or screws: every part lifts off Medium 24 magnets, no glue or screws: every part lifts off Large 32 magnets, no glue or screws: every part lifts off | |
| Colours | Shade: any of 5 translucent colours. Other parts: any of 5 matte colours, each part its own | |
| ILLUMINATION | Light source | LED, E27 A60 bulb, included |
| Light output | approx. 600 lm | |
| Colour temperature | 2700 K | |
| CRI | approx. 80+ | |
| Life hours | approx. 15,000 | |
| POWER | Input | 220–240 V AC; 110–120 V for Canada and Taiwan |
| Max. usage | approx. 6 W | |
| Plug | Type G (MY, SG, HK), Type I (AU, NZ, CN), Type C (TH), Type A (TW, CA) | |
| DIMMING | Not dimmable as supplied. | |
| CORD | Cord | 2 m twisted fabric, in-line switch, plug for your country (standard E27 cord set) |
| Lampholder | E27 | |
| CARE | Indoor use only. Dust with a dry cloth or a soft brush; keep acetone, solvents and harsh cleaners away from the printed parts. LED bulbs only, never incandescent or halogen: they run far hotter than a printed lamp is made for. Keep out of hot direct sun. | |
| MATERIALITY | Printed to order, one fine layer at a time, so faint layer lines are part of the surface. Tint can vary slightly between spools: for lamps that must match, order them together. | |
Figures marked approx. are typical of the bulb and fittings supplied and are confirmed against the first lamps made.