Coming soon
Hotaru
From RM379.00
No reviews yet
A glowing ball with a fine knit across it, in a low cup, closed by a flat top - the whole lamp in one colour, in two tones.
Coming soon
Hotaru is being test-printed. It goes on sale when the first one is lit in our own workshop - until then, choose a size and colours below to see it.
Size. Made in one size.
- One size 130 × 128 mm RM379.00
Colourway. Pick the colour you like best.
Colour. The whole lamp, in one.
In the box.
Printed to order and held together by magnets, so the orb and the top lift off: the orb in translucent PLA, the top and the base, which holds the lampholder, in matte PLA. Comes complete: the standard E27 cord set (E27 lampholder, 2 m twisted fabric cord, in-line switch and the plug for the country it is delivered to) and a 2700 K G45 LED bulb.
Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
What’s in the box
Specifications
Download spec sheet (PDF)| OVERVIEW | Designer | Year | Hakumei | 2026 |
|---|---|---|
| Dimensions | Ø13 × H12.8 cm | |
| Weight | approx. 0.32 kg complete (137 g printed) | |
| Material | Orb: translucent PLA. Top and base: matte PLA. About the materials | |
| Origin | Designed and printed in Malaysia | |
| Assembly | 16 magnets, no glue or screws: every part lifts off | |
| Colours | Eight, each in two tones: Snow, Honey, Ember, Blossom, Ruby, Smoke, Sky and Moss | |
| ILLUMINATION | Light source | LED, E27 G45 golf-ball bulb, included |
| Light output | approx. 500 lm | |
| Colour temperature | 2700 K | |
| CRI | approx. 80+ | |
| Life hours | approx. 15,000 | |
| POWER | Input | 220–240 V AC; 110–120 V for Canada and Taiwan |
| Max. usage | approx. 6 W | |
| Plug | Type G (MY, SG, HK), Type I (AU, NZ, CN), Type C (TH), Type A (TW, CA) | |
| DIMMING | Not dimmable as supplied. | |
| CORD | Cord | 2 m twisted fabric, in-line switch, plug for your country (standard E27 cord set) |
| Lampholder | E27 | |
| CARE | Indoor use only. Dust with a dry cloth or a soft brush; keep acetone, solvents and harsh cleaners away from the printed parts. LED bulbs only, never incandescent or halogen: they run far hotter than a printed lamp is made for. Keep out of hot direct sun. | |
| MATERIALITY | Printed to order, one fine layer at a time, so faint layer lines are part of the surface. Tint can vary slightly between spools: for lamps that must match, order them together. | |
Figures marked approx. are typical of the bulb and fittings supplied and are confirmed against the first lamps made.