Coming soon
Koma
From RM1,590.00
No reviews yet
Koma, the spinning top: four glowing lenses stood on edge, each with one dimple, each turned a quarter further round, in a column 1.3 m tall.
Coming soon
Koma is being test-printed. It goes on sale when the first one is lit in our own workshop - until then, choose a size and colours below to see it.
Size. Made in one size.
- One size 320 × 1327 mm RM1,590.00
Colourway. Ready-made colours for every part.
Colours. Every part, your choice.
In the box.
Printed to order: the glowing column, in translucent PLA, stacks on an aluminium spine over a matte PLA foot, held by matte PLA collars. The light is a 24 V LED strip, 2700 K, running up inside the column. Comes complete: a plug-in 24 V adaptor with an in-line dimmer. No bulb to change and no wiring.
Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
What’s in the box
Specifications
Download spec sheet (PDF)| OVERVIEW | Designer | Year | Hakumei | 2026 |
|---|---|---|
| Dimensions | Ø32 × H132.7 cm | |
| Weight | approx. 1.97 kg complete (1393 g printed) | |
| Material | Shade: translucent PLA. Collars and foot: matte PLA. Spine: aluminium tube. About the materials | |
| Origin | Designed and printed in Malaysia | |
| Assembly | Stacks on an aluminium spine, held by 64 magnets | |
| Colours | Shade: any of 5 translucent colours. Other parts: any of 5 matte colours, each part its own | |
| ILLUMINATION | Light source | LED strip, 24 V, inside the column, included |
| Light output | approx. 1,412 lm | |
| Colour temperature | 2700 K | |
| POWER | Input | 24 V DC from the plug-in adaptor supplied |
| Max. usage | approx. 15 W | |
| Plug | Type G (MY, SG, HK), Type I (AU, NZ, CN), Type C (TH), Type A (TW, CA) | |
| DIMMING | Dimmable with the in-line dimmer supplied. | |
| CORD | Cord | Adaptor lead with in-line dimmer |
| CARE | Indoor use only. Dust with a dry cloth or a soft brush; keep acetone, solvents and harsh cleaners away from the printed parts. Use only the adaptor supplied. Keep out of hot direct sun. | |
| MATERIALITY | Printed to order, one fine layer at a time, so faint layer lines are part of the surface. Tint can vary slightly between spools: for lamps that must match, order them together. | |
Figures marked approx. are typical of the bulb and fittings supplied and are confirmed against the first lamps made.