Coming soon
Obi
From RM379.00
No reviews yet
A capsule with one raised band spiralling a turn and a quarter round it, like a sash.
Coming soon
Obi is being test-printed. It goes on sale when the first one is lit in our own workshop - until then, choose a size and colours below to see it.
Size. The same lamp, three heights.
- Small 155 × 322 mm RM379.00
- Medium 185 × 384 mm RM459.00
- Large 210 × 451 mm RM599.00
Colourway. Ready-made colours for every part.
Colours. Every part, your choice.
In the box.
Printed to order and held together by magnets, so any part lifts off and can be swapped for another colour: the shade in translucent PLA, the base and trim in matte PLA. Comes complete: the standard E27 cord set (E27 lampholder, 2 m twisted fabric cord, in-line switch and the plug for the country it is delivered to) and a 2700 K LED bulb.
Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
The small size takes a G45 golf-ball bulb, included; medium and large take an A60.
What’s in the box
Specifications
Download spec sheet (PDF)| OVERVIEW | Designer | Year | Hakumei | 2026 |
|---|---|---|
| Dimensions | Small Ø15.5 × H32.2 cm Medium Ø18.5 × H38.4 cm Large Ø21 × H45.1 cm | |
| Weight | Small approx. 0.40 kg complete (212 g printed) Medium approx. 0.52 kg complete (311 g printed) Large approx. 0.60 kg complete (398 g printed) | |
| Material | Shade: translucent PLA. Top ring, band and base: matte PLA. About the materials | |
| Origin | Designed and printed in Malaysia | |
| Assembly | Small 24 magnets, no glue or screws: every part lifts off Medium 32 magnets, no glue or screws: every part lifts off Large 32 magnets, no glue or screws: every part lifts off | |
| Colours | Shade: any of 5 translucent colours. Other parts: any of 5 matte colours, each part its own | |
| ILLUMINATION | Light source | Small LED, E27 G45 golf-ball bulb, included Medium LED, E27 A60 bulb, included Large LED, E27 A60 bulb, included |
| Light output | Small approx. 500 lm Medium approx. 600 lm Large approx. 600 lm | |
| Colour temperature | 2700 K | |
| CRI | approx. 80+ | |
| Life hours | approx. 15,000 | |
| POWER | Input | 220–240 V AC; 110–120 V for Canada and Taiwan |
| Max. usage | approx. 6 W | |
| Plug | Type G (MY, SG, HK), Type I (AU, NZ, CN), Type C (TH), Type A (TW, CA) | |
| DIMMING | Not dimmable as supplied. | |
| CORD | Cord | 2 m twisted fabric, in-line switch, plug for your country (standard E27 cord set) |
| Lampholder | E27 | |
| CARE | Indoor use only. Dust with a dry cloth or a soft brush; keep acetone, solvents and harsh cleaners away from the printed parts. LED bulbs only, never incandescent or halogen: they run far hotter than a printed lamp is made for. Keep out of hot direct sun. | |
| MATERIALITY | Printed to order, one fine layer at a time, so faint layer lines are part of the surface. Tint can vary slightly between spools: for lamps that must match, order them together. | |
Figures marked approx. are typical of the bulb and fittings supplied and are confirmed against the first lamps made.