Coming soon
Tripod
From RM1,590.00
No reviews yet
A tall capsule shade hung between three splayed oak legs, about 1.5 m tall.
Coming soon
Tripod is being test-printed. It goes on sale when the first one is lit in our own workshop - until then, choose a size and colours below to see it.
Size. Made in one size.
- One size 682 × 1470 mm RM1,590.00
Colourway. Ready-made colours for every part.
Colours. Every part, your choice.
In the box.
Printed to order: a two-part translucent PLA shade, hung on the lampholder from a matte PLA crown that holds three oak legs. Comes complete: the standard E27 cord set (E27 lampholder, 2 m twisted fabric cord, in-line switch and the plug for the country it is delivered to) and a 2700 K A60 LED bulb.
Printed entirely in PLA, a plastic made from plant sugars - from crops such as corn - instead of oil.
What’s in the box
Specifications
Download spec sheet (PDF)| OVERVIEW | Designer | Year | Hakumei | 2026 |
|---|---|---|
| Dimensions | Ø68.2 × H147 cm | |
| Weight | approx. 1.13 kg complete (537 g printed) | |
| Material | Shade: translucent PLA. Crown: matte PLA. Legs: oak dowels. About the materials | |
| Origin | Designed and printed in Malaysia | |
| Assembly | Three oak legs glued into the printed crown; the shade hangs from it on the lampholder | |
| Colours | Shade: any of 5 translucent colours. Other parts: any of 5 matte colours, each part its own | |
| ILLUMINATION | Light source | LED, E27 A60 bulb, included |
| Light output | approx. 600 lm | |
| Colour temperature | 2700 K | |
| CRI | approx. 80+ | |
| Life hours | approx. 15,000 | |
| POWER | Input | 220–240 V AC; 110–120 V for Canada and Taiwan |
| Max. usage | approx. 6 W | |
| Plug | Type G (MY, SG, HK), Type I (AU, NZ, CN), Type C (TH), Type A (TW, CA) | |
| DIMMING | Not dimmable as supplied. | |
| CORD | Cord | 2 m twisted fabric, in-line switch, plug for your country (standard E27 cord set) |
| Lampholder | E27 | |
| CARE | Indoor use only. Dust with a dry cloth or a soft brush; keep acetone, solvents and harsh cleaners away from the printed parts. LED bulbs only, never incandescent or halogen: they run far hotter than a printed lamp is made for. Keep out of hot direct sun. | |
| MATERIALITY | Printed to order, one fine layer at a time, so faint layer lines are part of the surface. Tint can vary slightly between spools: for lamps that must match, order them together. | |
Figures marked approx. are typical of the bulb and fittings supplied and are confirmed against the first lamps made.